Ford Transit
partitions are must have accessories in your vans. They offer optimal
structural support, add additional storage space and make your
commercial van safer than before
Van partitions are
commonly known as bulkhead partitions and are an integral aspect of
any commercial van as they are designed to keep the driver side
isolated from the cargo hold. These partitions are made of heavy duty
steel or aluminum, thus securing the cargo bay from unwanted
intruders. Ford transit partitions
are available in a variety of sizes and specifications, which in turn
enable the customization of your van interiors to suit all
requirements.
The choice in the
bulkhead partition is based solely on the specific requirements of
the van. The Ford partitions are almost always premade- fabricated to
standard specifications. This makes shopping for a good bulkhead
partition for your van very convenient. These standard setups are
quite sufficient for most cargo-bearing purposes. They are strong,
sturdy, and are capable of meeting the expectations of most
commercial van owners. However, you can also opt to have them made to
custom specifications on the basis of your requirements. These
customized partitions are designed to meet every specific requirement
of vans / operations.
In addition, there is
a wide range of interior and exterior specific accessories for Ford
Transit that is making it to the list of much-wanted auto products
online. From automotive lighting to high-end performance parts,
wheels, tires, audio and electronics accessories, auto repair parts,
auto body parts and many other tools, there is absolutely no end to
the number of useful van accessories on sale on reputed specialty
sites. It is indeed the right time to assess the cargo and storage
based needs of the vehicles in your fleet and set about the task of
making your vehicle better accessorized than before. Here are some
top tips to aid your cause.
Types of partitions
Standard van
partitions are either permanently installed or temporarily installed.
The high-quality permanent partitions for Ford Transit
are
directly fitted to the body of the hull using bolts and welds that
keep the partition in place forever. Permanent partitions are most
popular among commercial van owners who have an innate need to
separate the cargo area with the driver’s area. Permanent
partitions are one of the best ways to set this up. They are cheaper,
more reliable and as there are no lose parts, one can be assured of
safety and security at all times. Installing permanent Ford
partitions for Transit model requires very few parts and fixtures and
the quality of workmanship has little chances of being substandard.
However, installing a
permanent fitting requires the contractor to drill holes into the
body of the vehicle; this is done in order to mount the partition
fitting directly on to the van. This will risk exposing the bare
metal of the body to moisture (that can cause corrosion), thus
weakening the metal walls of the van. Hence, care should be taken to
insulate the exposed metal by coating it with suitable paints and
varnishes to prevent such accidents.
Like the name
suggests, temporary partitions for different models of Ford Transit
can be mounted and dismounted from the van as and when required.
These temporary fixtures are generally used by contractors who use
their cargo vans to ferry their technicians. This adaptability
feature increases efficiency and one is able to personalize the
storage space to suit all immediate and future van carriage and
storage needs.
It is easy to mount
and dismount the well-installed Ford partitions. The act can be
performed with the help of a few simple tools. However, the fittings
where the partition has to be mounted should be firmly attached to
the walls of the van. Thus, fitting temporary partitions on a Ford
Transit requires a fair degree of workmanship, especially when
installing the primary fittings.
Owing to their nature,
the installation of temporary and reliable partitions
requires
expert help. One has to ensure that the support furnishings are
aligned properly to ensure a snug fit for the partition. Since
permanent installations are done on the hull of the van and the
partition itself, fitting them does not pose much of an alignment
challenge. With a temporary partition, however, the technician has to
be careful with the measurements and the drilling points to keep the
fitting in optimal positions. Failure to adhere to proper
measurements can be detrimental to the wellbeing of the van as it
risks the partitions so placed from being dismounted when the van is
in transit, thus compromising upon the safety of the cargo and
drivers alike.
Consider the weight
distribution
The partitions
designed for Ford models are quite heavy on their own and add a
considerable amount of weight to the van. It is thus necessary to
ensure that the weight of the partition is distributed evenly and the
center of gravity does not shift too much. Keeping track of the
weight distribution will ensure that the van is in its most stable
position when moving, thus offering optimal stability and safety
while on the road.
A weight imbalance can
significantly hamper the stability of the vehicle, especially when
riding on precarious conditions such as in rain and snow or if the
roads are laden with potholes. This will also put unnecessary stress
on the vehicle’s tires, brakes and transmission, thus resulting in
higher maintenance costs. Since a commercial van has to carry
additional goods and heavy equipment, it is important to consider the
additional weigh that they add as well. Thus one has to invest
enough time and efforts to design the interiors of the commercial van
soundly; so as to ensure optimal safety and reliability.
Additional benefits
As these partitions
are so strong, they practically seal off the cargo area and limit
access from the driver’s side. Thus, even the driver will have to
move to the back of the van to access the cargo bay. This will
significantly reduce any chances of theft and break in, and will keep
your goods and equipment safe from intruders.
Solid partitions for
cargo vehicles also offer a fair degree of thermal barrier between
the driver and the cargo. Hence, the air conditioner in the driver’s
side does not have to work extra hard to regulate the temperature of
the entire van, instead it only cools down the smaller driver’s bay
effectively and with ease. High quality partitions also act as
acoustic barriers. The driver will no longer be distracted by the
clattering noise from the cargo area, which will help keep his entire
focus on the road, thus resulting in a safer ride.
Installing the right
kind of bulkhead partition offers you a slew of benefits that helps
make the van safer and also aids in making your business operations
more effective. These partitions can also be used to house shelves
and other additional storage bins, which will help improve the space
usage within the van’s cargo area. You will no longer have to worry
about losing important tools and papers in the clutter of the van. If
you are looking to install Ford
Transit partitions,
then you ought to visit our website to check out the best options
available, at http://www.americanvan.com/
No comments:
Post a Comment